Featured Products
Upgrade Your Fleet with AEROgrease AVG X
High-Performance Synthetic Microgel Formula for Aviation
Exceptional Oxidation Resistance for Extended Grease Life
Superior Rust and Corrosion Protection in Harsh Conditions
AEROGREASE AVG22
Aviation Global Grease AVG 22 is a high-performance synthetic grease designed for aviation. Its synthetic hydrocarbon Microgel ensures excellent performance, while additives provide oxidation resistance to extend grease life. AVG 22 also offers superior protection against rust and corrosion, essential for harsh aviation environments.
Meets Specifications –
▪︎MIL-PRF-81322G
▪︎MIL-PRF-2408B
▪︎DEF STAN 91-52
▪︎DCSEA 395/A
▪︎NATO CODE G-395
Advanced Anti-Wear Properties for Extended Component Lifespan
Reliable Performance Under Heavy Load Conditions
Broad Operating Temperature Range: -60°C to 165°C
AEROGREASE AVG148
Anti-Wear Properties of AVG 148 reduces friction and wear, extending the lifespan of lubricated components. AVG 148 Can handle heavy loads without losing its lubricating properties.The useful operating temperature range for AVG 148 is typically from -60°C to 165°C. This broad temperature range makes it suitable for a wide variety of aviation applications, from extreme cold conditions to high-temperature environments.
Meets Specifications –
▪︎MIL-PRF-23827 TYPE 1 & 2
▪︎AIMS 09-06-002
▪︎SAE-AMS-3052
▪︎BMS 3-33
▪︎NATO CODE G-354
Water-Resistant and Ideal for High-Speed Aircraft Wheel Bearings
Exceptional Load-Carrying Stability for High Thrust Bearings
High Temperature Resistance with Thermostable Polyol Ester
AEROGREASE AVG07
Aviation Global Grease AVG 22 is a high-performance synthetic grease designed for aviation. Its synthetic hydrocarbon Microgel ensures excellent performance, while additives provide oxidation resistance to extend grease life. AVG 22 also offers superior protection against rust and corrosion, essential for harsh aviation environments.
Meets Specifications –
- Meets DCSEA 361/B (ex AIR 4207)
- Meets MIL-G-25760 A (obs)
Micronised Graphite Blend for Superior Electrical Conductivity
Ideal Anti-Seize and Assembly Compound for Heavy Load Applications
High-Temperature Performance for Engine Spark Plugs and Propeller Shafts
AEROGREASE AVG 47
AVG 47 is a homogenous mixture of pure Petroleum and 50 % of micronised graphite. It is a fairly good electrical conductor.
Applications –
• Anti-seize, assembly, dismantling compound
• Heavy load applications (wheels, etc.)
• High-temperature applications (engine spark plugs, propeller shafts, splines, threaded fasteners, fitting of rear parts of gas turbines, etc.)
Meets Specifications –
▪︎AIR 4247/A Iss.2
▪︎GE A50TF201
▪︎Equivalent to DEF STAN 80-80 Iss. 2 / ZX-13
▪︎Equivalent to SAE AMS 2518 D
▪︎Snecma DMR 75-205
▪︎Airbus Helicopters
Products List
| S.NO. | AVG Part No.s | |
|---|---|---|
| 1 | AVG 05 | Part Description: AVG 05 is a NLGI 2 grease based on a high viscosity mineral oil thickened by clay. It has a good resistance to water wash out and excellent load carrying capacity. Its typical operating temperature range is from -18°C to + 149°C. Applications : Heavy duty wheel bearing • Wheels • Starter magnetos, generators • Military automotive components (truck electric retarder TELMA) Specification: Can be technically replaced by Aero Grease AVG 22 (MIL-PRF-81322) or Aero Grease AVG 3058 (SAE-AMS-3058) |
| 2 | AVG 15 | Part Description: AVG 15 is a lithium grease based on a mineral oil with a viscosity of 5 cSt at 100°C. It is inhibited against corrosion and oxidation and has good water resistance. AERO GREASE AVG 15 can be used from -40°C to +121°C. Applications : Airframe multipurpose grease (doors, flaps, slaps, landing gear, etc.) • Anti-friction bearings, plain bearings & gearboxes Specification: • DCSEA 382/A (ex AIR 4215) • Meets MIL-G-7711 A (obs) • Meets MIL-PRF-24139 B |
| 3 | AVG 148 | Part Description: Anti-Wear Properties of AVG 148 reduces friction and wear, extending the lifespan of lubricated components. AVG 148 Can handle heavy loads without losing its lubricating properties.The useful operating temperature range for AVG 148 is typically from -60°C to 165°C. This broad temperature range makes it suitable for a wide variety of aviation applications, from extreme cold conditions to high-temperature environments. Applications : Multipurpose airframes (doors, flaps, slats, THS, bearings, etc.) Oscillating bearings Landing gears Heavy loaded systems Specification: ▪︎MIL-PRF-23827 TYPE 1 & 2 ▪︎AIMS 09-06-002 ▪︎SAE-AMS-3052 ▪︎BMS 3-33 ▪︎NATO CODE G-354 ▪︎ATR |
| 4 | AVG 46 | Part Description: Aero Grease AVG 46 is based on a 13 cSt at 40°C mineral base stock and thickened with a calcium soap. It is also oxidation and corrosion inhibited.Aero Grease AVG 46 offers a very good protection against water corrosion and can be used from -55°C to +75°C. Applications : • Bearings and splines (rotating or non-rotating, oscillating) of aircrafts • Helicopter tail rotor bearings where an outstanding protection against fretting wear is required Can be technically replaced by the synthetic grease Aero Grease AVG 148 Specification: • Meets DEF STAN 91-51 Iss. 2 / XG-284 • Meets MIL-G-25537 C Amd1 • Meets DCSEA 366/A |
| 5 | AVG 25013 | Part Description: Aero GREASE AVG 25013 is an NLGI 2 Grade grease, based on a high performance silicone oil thickened with polytetrafluoroethylene and reinforced with anti-corrosion and antioxidant additives. Aero GREASE AVG 25013 is fully compatible with all types of elastomer but silicone rubber. Aero GREASE AVG 25013 can be used from -73°C to +232°C Applications : • Aircraft and helicopter airframe multipurpose grease (doors, flaps, slaps, landing gear, etc.) • Ball and roller bearings with especially low torque at low temperature • Screw actuators of aircraft • Anti-seize, assembly, dismantling grease for tie bolts and nuts of wheels Specification: • Meets MIL-G-25013 E • Meets VJS PHM 5-3-L (Czech Rep) • Meets XG-300 |
| 6 | AVG 07 | Part Description: Aero Grease AVG 07 is a clay-thickened NLGI 2 grease, based on a highly thermostable polyol ester with a viscosity of 5 cSt at 100°C. It contains specific high temperature anti-oxidants and has strong extreme- pressure properties. Applications : "Aero Grease AVG 07 has excellent load carrying stability and is most suitable in anti-friction bearings at high thrust load and high temperature up to + 180°C. It has also good water resistant properties, making it suitable as wheel bearing grease for aircraft with high landing speeds." Specification: • Meets DCSEA 361/B (ex AIR 4207) • Meets MIL-G-25760 A (obs) |
| 7 | AVG 17 | Part Description: Aero Grease AVG 17 is a soft NLGI 2 grease, based on a synthetic diester oil thickened with a lithium soap. It is fortified with anti-corrosion, antioxidant and anti-wear additives. It also contains 5% of molybdenum disulphide as solid lubricant. Aero Grease AVG 17 can be used from -73°C to +121°C. Applications : • Airframe multipurpose grease (actuators, doors, flaps, slaps, landing gear, THS, etc.) • Shock-loading bearings & rollers • Parts in sliding motion Specification: • Meets DCSEA 354/B (ex. DCSEA 353/A) • Meets MIL-G-21164 D |
| 8 | AVG 22 | Part Description: Aero GREASE AVG 22 is a NLGI 2, clay-thickened grease, based on a synthetic hydrocarbon oil with a viscosity of 7 cSt at 100°C. It is resistant to corrosion, oxidation and contains anti wear/extreme pressure additives. It can be used from -65°C to +177°C. Applications : • Airframe multipurpose grease (doors, flaps, slats, landing gear, THS, etc.) of most civil and military aircrafts and helicopters • Wheel bearings of most of civil and military aircrafts and helicopters • Main and tail rotor of helicopter Specification: • Meets MIL-PRF-81322 G • Meets DSEO 395/D (ex AIR 4222) • Meets MIL-G-3545 C (obsolete) • Meets AIR 4205/B (obsolete) • Equivalent to DEF STAN 91-52 Iss. 1 / XG-293 |
| 10 | AVG148 | Part Description: Aero GREASE AVG 148 is a NLGI 2 Grade, multipurpose aircraft grease, based on a blend of synthetic diester oils and synthetic hydrocarbon base stock and thickened with a complex lithium soap. It is fortified with anticorrosion, antioxidant and strong extreme pressure and anti-wear additives. Applications : • Multipurpose grease (doors, slat & flaps, landing gear, THS,..) for civil and military aircrafts and helicopters • Can technically replace greases of previous generations meeting the requirements of MIL-PRF-23827 Type I and II, Nato code G-382, AIMS-09-06-001, MIL-G-25537, among others. Specification: • Meets SAE-AMS-3052 • Meets MIL-PRF-23827 C Type I • Meets Airbus AIMS-09-06-002 • Meets Boeing BMS 3-33 C |
| 11 | AVG 4343 | Part Description: Aero Grease AVG 4343 is a NLGI 2 silicone-based grease thickened by a lithium soap. Its operating temperature range is from -65°C to +175°C. Applications : • Aircraft pneumatic systems (rubber to rubber contact) • Pressurized cabin bulkheads grommets • Rubber to metal lubrication Specification: • Meets SAE AMS-G-4343 • Eq. to XG-269 |
| 12 | AVG 3058 | Part Description: Aero Grease AVG 3058 is a lithium complex thickened synthetic grease. It demonstrates high load carrying capability and good resistance to water wash-out and offers a very good protection from corrosion even in presence of salt water. Can be used from -54 to +175°C Applications : • Wheel bearings of civil and military aircraft exposed to high load and high temperature during braking, as well as corrosive runaway de-icing fluids • Landing gears • Multi-purpose grease for general aviation (propellers, airframe) and military aircraft Specification: • Meets SAE AMS-3058 • Meets Airbus AIMS-09-06-003 • Meets MIL-PRF-32014A • Meets DCSEA 382/A |
| 15 | AVG 47 | Part Description: Aero Grease AVG GA 47 is a homogenous mixture of pure petrolatum and 50 % of micronised graphite. It is a fairly good electrical conductor. Applications : • Anti-seize, assembly, dismantling compound • Heavy load applications (wheels, etc.) • High temperature applications (engine spark plugs, propeller shafts, splines, threaded fasteners, fitting of rear parts of gas turbines, etc.) Specification: • Meets AIR 4247/A Iss.2 • Meets GE A50TF201 • Equivalent to DEF STAN 80-80 Iss. 2 / ZX-13 • Equivalent to SAE AMS-2518 D |